Pasteurisation F values

Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic

   Dear Jennie

First and this is important. Will your regulatory authority accept a process that gives a lethality equivalent to 79.4 C for 5 minutes? Or do they require you to hold a product at 79.4 C for 5 minutes and to evidence this using temperature / time data?

Assuming the former is true then you can obtain a lethality equivalent to 79.4 C for 5 minutes by holding at a lower temperature than the reference temperature say 69 or 72 for the appropriate time. Note that extended holding times will be required. You will also need to add the "come up" and "come down" times.  You can use the spreadsheet at http://www.dairyscience.info/feedback/citefo.asp to quickly do the calculations assuming a Z value of 10C or the free lethal rate calculator at http://www.dairyscience.info/newCalculators/lethalcomp.aspx . 

Author	Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic
Admin Members Profile Send Private Message Find Members Posts Add to Buddy List Admin Group Administrator Joined: 01 Sep 2009 Location: N. Ireland Status: Offline Points: 390	Post Options Post Reply Quote Admin Report Post Thanks(0) Quote Reply Topic: Pasteurisation F values Posted: 09 Aug 2010 at 11:08pm
	Dear Jennie First and this is important. Will your regulatory authority accept a process that gives a lethality equivalent to 79.4 C for 5 minutes? Or do they require you to hold a product at 79.4 C for 5 minutes and to evidence this using temperature / time data? Assuming the former is true then you can obtain a lethality equivalent to 79.4 C for 5 minutes by holding at a lower temperature than the reference temperature say 69 or 72 for the appropriate time. Note that extended holding times will be required. You will also need to add the "come up" and "come down" times. You can use the spreadsheet at http://www.dairyscience.info/feedback/citefo.asp to quickly do the calculations assuming a Z value of 10C or the free lethal rate calculator at http://www.dairyscience.info/newCalculators/lethalcomp.aspx .

Sponsored Links

Jennie Members Profile Send Private Message Find Members Posts Add to Buddy List Newbie Joined: 09 Aug 2010 Location: CA USA Status: Offline Points: 1	Post Options Post Reply Quote Jennie Report Post Thanks(0) Quote Reply Posted: 09 Aug 2010 at 1:34am
	Dear Dr. Michael, Thank you so much for your post. I still have a question. If a process authority said our process needs 79.4 C for 5 minutes. In order to calculate least sterilizing value, I have set 79.4 C as reference temperature. Shceduled process is fill and hold process. Can filling temperature be some where below 79.4C, let say it's 69 - 72.2 C? Would this be possible? Or filling temperature needs to be above reference temperature? Please kindly advise. Thank you very much in advance. Jennie

Admin Members Profile Send Private Message Find Members Posts Add to Buddy List Admin Group Administrator Joined: 01 Sep 2009 Location: N. Ireland Status: Offline Points: 390	Post Options Post Reply Quote Admin Report Post Thanks(0) Quote Reply Posted: 17 May 2010 at 8:23pm
	I have had an interesting series of Emails concerning the determination of the F value of a product which received an in pack pasteurisation heat treatment. I am summarising these discussions and making them as generic as possible to avoid any confidentiality issues. Companies processing e.g. sous vide type-products must ensure that they are safe. This means subjecting the product to a time / temperature treatment that will reduce the probability of the presence of viable pathogenic or spoilage organisms by the requisite number of D-values. Lets say that regulatory authorities in a particular country specify that manufacturers must ensure that their products are subjected to a lethality equivalent to say 65°C for 10 minutes. The F value must be determined using 65°C as the reference temperature; every minute at this temperature will give a value of 1. During the heating and cooling period of the product some microbial destruction will take place and this needs to be calculated. As a consequence the lethality calculated during heating and cooling must be added to the lethality experienced at the reference temperature. The methodology for doing this is described on this site and the F value can be calculated using the calculator or e.g. an Excel spreadsheet.