![]() |
Titratable Acidity and total solids in milk |
Post Reply ![]() |
Author | |
michael ![]() Guest Group ![]() |
![]() ![]() ![]() ![]() ![]() Posted: 22 Mar 2010 at 10:21pm |
The older textbooks provide very good information on topics like titratable acidity (TA) e.g. LING, EDGAR R A (1934). Textbook of Dairy Chemistry
London, Chapman & Hall. 1934. (ISBN: B0000CJG8F). TA is essentially a measure of the buffering capacity of milk and the contribution of the main factors caseins and phosphate have been given by Mr Cage. While TA is still widely used as an aid to process control during the manufacture of fermented products there are advantages in using pH instead. |
|
![]() |
|
Sponsored Links | |
![]() |
|
MrCage ![]() Guest Group ![]() |
![]() ![]() ![]() ![]() ![]() |
The acidity in milk is measured, by titration with a 0.1 n NaOH solution, and indicates the consumption of NaOH necessary to shift the pH-value from 6.6 ± 0.1 (corresponding to fresh milk) to a pH-value of 8.2 - 8.4 (phenolphthalein).
Fresh milk contains little to no lactic acid, and the consumption of NaOH is used to change the pH-value of the following components: Carbondioxide equivalent to 0.01% lactic acid Citrates - 0.01% lactic acid Casein - 0.07% lactic acid Albumin/globulin - 0.01% lactic acid Phosphates - 0.03% lactic acid Titratable acidity equivalent to 0.13% lactic acid The determination of "acidity" in fresh milk by means of titration a measure of the buffer action of teh above components. Since fat does not provide buffering action the fat level will not impact your TA. The developed acidity, which is the result of fermentation producing lactic acid. The developed acidity will be more pronounced if the milk is not cooled. 13-14 should be okay for your TA's of non concentrated milks. If the milk measures 15 - 16% I would look at cooling of your product and sanitation of your farms. Your SNF should be around 8-9.5% depending on season and breed of cow. Add the fat levels you suggest to your SNF and you will have your total solids. |
|
![]() |
|
Chem77 ![]() Guest Group ![]() |
![]() ![]() ![]() ![]() ![]() |
Hi all,
I am looking for the values of titrable acidity and the total soldis for commercial available milk with a fat content of .1, 1.5 and 3.5 % fat without added solids. Does somebody know werhe I can find this information? |
|
![]() |
Post Reply ![]() |
|
Tweet
|
Forum Jump | Forum Permissions ![]() You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |